• 목록
• 답변
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, which can make it very dangerous and potentially fatal. It is crucial to take the time to ensure that you're doing everything you can to keep your windows in good shape.

For single pane windows it is relatively easy to replace them, and the replacement will usually fit inside the frame that was previously installed easily. However, if you have double pane windows that are held in place by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this situation it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window repair frame.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric and not on the floor which could cause them to be trampled.

It's a good idea to tape the gap once the glass is removed. This will keep drafts and water from getting into your property until a professional is able to fix the window. It also acts as a barrier that will prevent any intruders from getting access into your home. If the gap is particularly large, you might think about the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. In time, they could be affected by a variety of issues, including sliding. A window that is sagging can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from becoming worse.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to unblock the windows so you can reach the frame. After that, using a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close the window and check for an appropriate fit. If you're satisfied with the size of the window, you can tighten screws to hold them in place.

If you aren't able to move the hinges, you may require replacing the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. If this happens, it's crucial to replace the seal as fast as you can to ensure that your uPVC windows are watertight and secure from draughts.

UPVC handles can also loosen. This is typically caused by screws that have become undone over time, but it can be due to the handle mechanism wears out. It's fairly simple to fix a loose upvc window repair - pop over here, handle. First, you'll need to close your window and do an experiment fit. The corners of the sash must align with the casing joint. If it does not, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it's important to take action. Windows that leak water do are not just a cause for degrading of the structure of your home but also undermine your efforts to control the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is damaged or missing.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the issue is, old caulking might need to be removed. It is essential to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and could reduce your energy efficiency.

Check that any drainage holes are free of debris in them, and also ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious situations, you may need to think about replacing the window.

Moldy sills and rotten ones are another sign of water leakage. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely that the problem is related to the seal, not the frame. Again this can easily be corrected by a upvc window repairs near me window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or if it opens in a breeze. These are easily replaced by any competent DIYer and are usually done within a few minutes.

Like any mechanical component hinges will wear out over time. It's easy to change a window hinge, but it's easier if someone helps you hold the frame.

Check that the uPVC hinges are closed and open in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue can be caused either by opening the window improperly or a faulty installation in the factory. This issue can be fixed by sending us a picture through our website and we will be happy to give you advice.

It is also important to grease the hinges regularly. Applying a light engineering lubricant to the hinges is a good method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It also helps prevent corrosion and decrease the chance of sticking. This must be done at a minimum every year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges can also be unbalanced due to wear, creating a gap where the sash meets frame. This can be easily fixed by giving them a good clean, but when they're beyond repair, it could be necessary to get them realigned or replaced. Second, the interlock can also become disaligned. This happens on the hinge side and may need to be cleaned. In some cases it is possible to replace these.

The next common reason for draughts is window seals. These can become worn down or damaged over time, and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures, and also lessen the risk of draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler which can be hung over your window sill. They will keep your home warm by blocking cold air.

With a little regular maintenance and repair, your upvc windows will provide excellent security and insulation for your home. However, it is important to recognize that windows last for a certain period of time and there may come an point at which it is more efficient to replace them than fix them. If you have any problems with your window made of upvc you should consult a professional immediately.